HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module
Adding a Texture Module to Your fx+ Graphics Card
Installing Your Graphics Card and Texture Module
1. Ensure that the system data cables are correctly routed and flat
against the system so that they do not obstruct the HP V
Graphics Card.
2. Hold the card's bulkhead edge with your left hand and the card's right
edge with your right hand. Align the card and then slide it downward
toward the AGP Pro and PCI connectors, along the fan mount guide
on the right and the bulkhead openings on the left.
3. Align the cards's AGP contact fingers and PCI contact fingers with
their appropriate system board connector slots and push the card
firmly into position.
46
fx+
ISUALIZE
Chapter 1