HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module
2. Locate the four hook slots on the top edge of the system and align
these slots with the four panel hooks on the left-side panel. Next,
push the left-side panel inward (in the direction of the arrow). Note
that in some cases you might have to lift up slightly on the panel to
get the panel hooks to fit in the slots.
3. Screw the left-side panel thumb screws in place to complete the
left-side panel replacement on the Personal Workstation.
Chapter 1
Installing the HP Visualize fx+ Graphics Card
Gap is aprox.
0.5 inches
Thumb Screws
23