Checking The Installation - HP Workstation x1000 Installation Manual

HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module
Adding a Texture Module to Your fx+ Graphics Card

Checking the Installation

The HP V fx+ texture module is automatically detected by the
ISUALIZE
HP V fx+ driver. No software configuration is necessary. To
ISUALIZE
check that the Texture Module is correctly installed, follow these steps:
1. Switch on your Personal Workstation.
2. When in Windows NT, open the Display Properties window by
clicking the Start button, selecting Settings/Control Panel, and
double-clicking Display.
3. Click the About tab.
If the texture module was correctly installed, the About window will
contain the text: Hardware Texture Mapping: Installed.
To check that you have the latest version of this driver, refer to HP's web
site at: http:/www.hp.com/go/visualizesupport.
Chapter 1
Installation
Verification
49