HP Workstation x1000 Installation Manual page 32

HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module
Installing the HP Visualize fx+ Graphics Card
The Administration Panel
The Administration panel is only available if the user has system
administrator privileges. From this panel, the system administrator can
enable the user to access the Gamma Correction and Options panels and
allow the user to change and save the HP V
configuration.
The Gamma Correction Panel
Gamma correction is used to correct non-linearity in the phosphor
brightness of monitors. It can be used to improve the appearance of
antialiased lines, shaded graphic images, or scanned photographic
images that have not already been gamma corrected.
Creating Custom Driver Configurations
The Options panel allows you to create customized driver configurations
for the HP V
ISUALIZE
the Application group box.
To create a customized profile:
1. Set the desired options in the Settings group box. This will select the
*Custom setting in the Application group box.
2. Click the Save As button to save the current configuration. You are
prompted for a profile name.
3. Type a configuration name in the Save Configuration dialog box.
This name will appear in the Application group box.
Save As Button
Allows you to save the current *Custom configuration as a named
user-specific configuration.
Delete Button
Allows you to delete a custom configuration.
32
fx+ graphics card. These configurations appear in
fx+ Custom
ISUALIZE
Chapter 1