HP Workstation x1000 Installation Manual page 45

HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module
Adding a Texture Module to Your fx+ Graphics Card
6. Ensure that the connectors on the HP V
are fully inserted before securing it into place with the captive screws.
Note that you need to use the four captive screws located on the
texture module to mount it to the HP V
The four captive screws will fit into the four screw standoffs on the
fx+ graphics card.
Chapter 1
fx+ Texture Module
ISUALIZE
fx+ graphics card.
ISUALIZE
Standoff
45