Adding A Texture Module To Your Fx+ Graphics Card; Removing The Left-Side Panel; Removing The Hp Visualize Fx+ Graphics Card - HP Workstation x1000 Installation Manual

CAUTION
HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module

Adding a Texture Module to Your fx+ Graphics Card

Adding a Texture Module to Your fx+ Graphics
Card
This section contains the following sub-sections:

• Removing the Left-Side Panel

• Removing the HP V
• Installing the HP V
• Installing Your Graphics Card and Texture Module
• Replacing the Left-Side Panel
• Checking the HP V
• Troubleshooting
Removing the Left-Side Panel
For information regarding the removal of the left-side panel of your
Personal Workstation, read the subsection "Removing the Left-Side
Panel" in the section "Installing the HP V
Removing the HP V
Be very careful when handling the HP V
Bumping, bending, or dropping the card can cause irreparable damage.
1. Ensure that all power cords and telecommunications cables are
disconnected.
2. Ensure that all cables are correctly routed and out of the way so that
they do not obstruct the removal of the HP V
Card.
3. Carefully place the Personal Workstation on its side.
40
fx+ Graphics Card
ISUALIZE
Texture Module
ISUALIZE
Texture Module Installation
ISUALIZE
ISUALIZE
fx+ Graphics Card
ISUALIZE
fx+ Graphics Card."
fx+ Graphics Card.
ISUALIZE
fx+ Graphics
ISUALIZE
Chapter 1