Installing The Hp Visualize Fx+ Card - HP Workstation x1000 Installation Manual

HP Visualize fx2+, fx4+, fx6+ Graphics Cards and Texture Module
Installing the HP V
1. If your system already has a HP V
AGP Pro and PCI accessory slots, please proceed to the section
"Removing the HP V
card is occupying these slots, please follow this vendor's directions for
removing the card before proceeding.
2. Ensure that all power cords and telecommunications cables are
disconnected.
3. Ensure that all cables are correctly routed and flat against the system
so that they do not obstruct the HP V
Since the HP V
ISUALIZE
slots (one AGP Pro and one PCI), it may be necessary to remove two
bulkhead blanks, using a Torx
Bulkhead Blanks
4. Place the Personal Workstation on its side.
Chapter 1
Installing the HP Visualize fx+ Graphics Card
fx+ Card
ISUALIZE
ISUALIZE
fx+ Graphics Card." If another vendor's
ISUALIZE
ISUALIZE
fx+ Graphics Card occupies two accessory
screwdriver.
fx+ card occupying the
fx+ Graphics card.
17