Advertisement
Microsoft Windows for
Workgroups 3.11
Connecting to a Novell
NetWare 4.11 Server
13 Installing the IBM Token-Ring PCI Adapter
Microsoft Windows for Workgroups 3.11
13 Installing the IBM Token-Ring PCI Adapter
Requirements
• HP Vectra with Windows for Workgroups 3.11
• IBM Token-Ring 16/4 PCI card and drivers disk version 2.10.
• Driver File: IBMTRPO.EXE, version 2.04
• Microsoft Windows for Workgroups 3.11 media.
• Novell NetWare 4.11 Server system that supports IPX network protocol.
• NetWare Client for DOS and MS Windows v1.21 installation media.
Device Configuration
Device Configuration
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter
card into a PCI slot.
2 Connect network cable media to the IBM Token Ring card.
3 Update the "Dos" directory from Disk 2 and the "Novell\Dos" directory
from Disk 3 with the corresponding directories from the Odi_fix disk.
4 From the location of the "NetWare Client for DOS and Windows v1.21"
installation files, execute "Install.exe".
5 Select option 5 "Select the driver for your network board" and press
"Enter".
6 Select "OTHER DRIVERS"from the Network Board selection.
7 Insert the IBM Token Ring driver disk into the floppy drive.
8 Type the path "A:\NOVELL/DOS" when prompted and press "Enter".
9 Select "IBM PCI Token-Ring Adapter" and hit "Enter".
10 Accept the default network board settings and press "F10" to save it.
Vectra Vli8
09
03
1400
D800
Vectra VEi7
Vectra VEi8
10
E400
Advertisement
