Advertisement
8 Remove the IBM diskette from the floppy drive and click on "YES" to
restart the system when prompted.
9 Insert the "Novell Client for Windows 95" CD in the CDROM and execute
"Setup.exe".
10 Click on "Yes" to accept the License Agreement.
11 Select "Custom" installation and click on "Next".
12 Select "Bindery (NetWare 3.x)" and click on "Next".
13 Click on "Install" to start the installation.
14 Click on "Yes" to set the Preferred Server. (If you do not have the
required information, contact your network administrator).
15 Click on "Reboot" to complete the installation.
16 Right-click on the "Network Neighborhood" icon and select "Properties".
17 Accept the default Network Protocols and the Primary Network Logon to
(Novell NetWare Client) as seen below and click on "OK". (If you do not
have the required information, contact your network administrator)
18 Novell NetWare Client
Novell NetWare Client
IBM PCI Token-Ring Adapter
IPX 32-bit Protocol for the Novell NetWare Client
IPX/SPX-compatible Protocol
NetBEUI
19 Click on "OK" to accept the configuration.
20 Specify the path to your Windows 95 files when prompted.
3 Installing the IBM Token-Ring 16/4 PCI Adapter
Connecting to a Novell NetWare 3.12 Server
Advertisement
