Microsoft Windows NT
3.51 Workstation
Connecting to a
Windows NT 3.51 Server
9 Installing the IBM Token-Ring 16/4 PCI Adapter
Microsoft Windows NT 3.51 Workstation
9 Installing the IBM Token-Ring 16/4 PCI Adapter
Requirements
• HP Vectra with Windows NT 3.51 Workstation.
• IBM Token-Ring 16/4 PCI adapter and driver disk version 2.10.
• Driver File: IBMTRP.SYS, version 2.22
• Microsoft Windows NT 3.51 Workstation media.
• Microsoft Windows NT 3.51 Service Pack 5 media.
• Microsoft Windows NT 3.51 Server system that supports NetBEUI,
NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS transfer
protocols.
Device Configuration
Device Configuration
Interrupt
I/O Address
Procedure
1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter
into a PCI slot.
2 Connect network cable media to the IBM Token Ring PCI card.
3 Log into Windows NT with administrator privileges.
4 Open the "Network" icon in the "Control Panel" program group.
5 Click on "YES" in the "Network Settings" dialog box to install Windows NT
Networking.
6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive.
7 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the
Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window
and click on "Continue".
Vectra Vli8
05
03
1400
D800
Vectra VEi7
Vectra VEi8
10
E400