HP Vectra VE 5/xxx - 2 Manual page 47

7 You are installing a hard disk drive and a CD-ROM. Assuming that the PC
has no previously installed drives, which data cable connections do you
use?
a hard disk drive on inside HDD connector,
CD-ROM on outside (end) HDD connector.
b hard disk drive on outside (end) HDD connector,
CD-ROM on inside HDD connector.
c hard disk drive on inside HDD connector,
CD-ROM on a red CD-ROM connector.
d hard disk drive on outside (end) HDD connector,
CD-ROM on a red CD-ROM connector.
8 After installing a hard disk drive, how is it detected?
a automatically
b automatically if
c automatically if, once in the SETUP program, you press
the
Autotype fixed disk
d none of the above
9 What communication ports are standard?
a 2 serial ports,
1 bidirectional parallel port,
1 LAN connector.
b 1 serial port,
1 bidirectional parallel port,
1 LAN connector.
c 2 serial ports,
1 bidirectional parallel port.
d 2 serial ports,
2 bidirectional parallel ports.
10 What is the maximum number of PCI accessory boards that can be
installed?
a one
b two
c three
d four
is set to in the SETUP program
Type Auto
field and is set to
Type Auto
A Final Quiz
at
43