HP Vectra VE 5/xxx - 2 Manual page 37

Setup Item
PCI Devices
Slot #1 Bus Master
Slot #2 Bus Master
Slot #3 Bus Master
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
Security
Administrator password is
Set Administrator Password
Password on boot
Start with keyboard locked
Boot on flexible disk drive
Write on flexible disk drives
Use of flexible disk drive
Boot on hard disk drive
Fixed disk boot sector
Boot on CD-ROM
Space-bar POWER-ON
Default
Enabled Enable this option if you need the BIOS to set the PCI Bus
Master bit. This is only necessary for some old PCI cards.
Enabled
Enabled
Auto Select an IRQ number only if necessary (for example for
SCO-UNIX).
Auto
Auto
Auto
Disabled Indicates whether administrator password is enabled.
Allows you to set the administrator password. This
password prevents unauthorized access to the computer's
configuration and can also be used to start the computer.
Enabled Enable or disable password prompt on boot.
Disabled This feature allows the PC to start automatically, without
waiting for a password to be typed in, but the keyboard
will be locked. Only the user password can unlock the
keyboard. This option is only displayed if a user password
has been set and is not available if you are running
Windows 95. When the PC is started with the keyboard
locked, the Caps Lock LED flickers until the keyboard is
unlocked.
Enabled Enables or disables boot on flexible disk drive.
Enabled Enables or disables writing on flexible disk drives.
Disabling prevents data being copied in your absence.
User Limits the use of flexible disk drive(s) to the user or the
administrator, depending on the boot password.
Password on boot must be enabled for this option to be
set.
Enabled Enables or disables boot on hard disk drive.
Not protected Write-protects the boot sector on the hard disk (can
protect against viruses).
Enabled Enables or disables boot on CD-ROM.
Enabled Enables or disables the space-bar to power-on the PC.
3 Troubleshooting and Repair
Using SETUP to Configure the PC
Action
33