HP Vectra VE 5/xxx - 2 Manual page 42
Hp vectra ve 5/xx series 2, familiarization guide
Hide thumbs
Also See for Vectra VE 5/xxx - 2:
- User manual (148 pages) ,
- Handbook (8 pages) ,
- Technical reference manual (42 pages)
Table of Contents
Advertisement
3 Troubleshooting and Repair
Updating the System ROM
If an error occurs during the BIOS update process, an error message is
displayed. These are listed below:
Message
File does not contain the same BIOS
part-number
Cannot flash using user password, use
admin password
Open failed on BIOS ROM image file
38
Corrective Action
There is a mismatch between the file name in the Phlash
command and the file name in the code file itself.
To bypass it, type the command:
phlash xxxxxx.ful /o
where
is the name of the BIOS code file.
xxxxxx
You have entered the user password when booting the
machine.
Reboot and use your Administrator password.
The Secure Switch, system board switch 8, is CLOSED.
Open this switch to enable the BIOS flash.
Hide quick links:
Advertisement
Table of Contents
