Replacing The Cd-Rom - HP Tc2120 - Server - 256 MB RAM Maintenance Manual

Chapter 7
3. Remove the left side cover.
Refer to "Opening and Closing the hp server"
4. Remove the upper bezel.
Refer to "Opening and Closing the hp server"
5. At the rear of the CD-ROM, carefully disconnect the power and data cables.
6. Remove the CD-ROM:
Press in on both release tabs to release the CD-ROM tray assembly.
Pull the CD-ROM assembly out of the chassis.
Remove the four screws (two on each side) from the CD-ROM tray.
7. Place the CD-ROM in an anti-static bag.

Replacing the CD-ROM

1. Remove the CD-ROM from the shipping container.
2. Set the jumper on the back of the CD-ROM to "CS" (Cable Select). Refer to the CD-ROM documentation
for detailed instructions.
3. If not already mounted, place the CD-ROM into the CD-ROM tray and secure it using the four screws.
4. Guide the CD-ROM tray into the chassis opening, with the cable connectors of the CD-ROM toward the
rear of the chassis.
The first CD-ROM must be mounted in the second shelf.
5. Push the CD-ROM tray all the way into the chassis until the CD-ROM tray snaps into place.
The two release tabs should click when in place.
Figure 7-3. Removing the CD-ROM
in Chapter 3.
in Chapter 3.
Replacing Parts
83