Appendix A Specifications - HP T5730 - Compaq Thin Client Troubleshooting Manual

A Specifications
Table A-1 HP Compaq t5730/t5730w/t5735 Thin Client
Dimensions
Width (front to back)
Height (top to bottom)
Depth
Approximate Weight
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of 1° C/
300m (1.8° F/1000ft) to a maximum of 3Km (10,000ft), with
no direct, sustained sunlight. Upper limit may be limited by
the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457m per minute or 1500 ft
per minute)
Nonoperating
(max. allowed rate of change is 457m per minute or 1500 ft
per minute)
Power Supply
Operating Voltage Range
Rated Line Frequency
32

Appendix A Specifications

46 mm
254.5 mm
215.18 mm
1.3 kg
10° to 40° C
-30° to 60° C
** The operating temperature range when the thin client
is attached to a flat panel using the HP Quick Release
is 50° to 95° F (10° to 35° C).
10–90%
5–95%
3048 m
9144 m
100–240 VAC
50–60 Hz
1.811 in.
10.02 in
8.47 in.
2.9 lb
50° to 104° F
-22° to 140° F
10–90%
5–95%
10,000 ft
30,000 ft
100–240 VAC
50–60 Hz