HP ProLiant xw2x220c - Blade Workstation Administrator's Manual page 63

Windows XP Pro x64
b.
• Add to the [Unattended] section
IMPORTANT:
omitted. Because the blade workstation contains two video controllers, the workstation will make the NVIDIA
driver primary during the install and the screens will go black if Remote Console Mode is in Setup Mode. This
is because the iLO Remote Console and Local I/O Connector displays are controlled by the ATI controller
and will be deactivated if NVIDIA is the primary controller. The NVIDIA driver is installed later in the
installation process and activated before switching to User Mode.
IMPORTANT:
page are not Microsoft signed. It is your decision to download and install the unsigned drivers. If you decide
not to use the unsigned drivers, the default VGA driver in the operating system will be loaded. Remove the
ATI lines in the driver path to prevent the ATI driver from loading.
Add to the [MassStorageDrivers] section
•
• Add to the [OEMBootFiles] sections
• Add to the [GuiUnattended] section
• Add to the [NetOptionalComponents] section
NOTE: The above entry installs SNMP during setup. This must be done or the management agents will not
install correctly.
• Add to the [GuiRunOnce] section
The above entry will run the install script "Driver_Software_Install.cmd" (see Appendices) that will
install drivers and software at first login after install.
Plug and Play driver location:
OemPNPDriversPath="\\%SERVERNAME%\RemInst\%INSTALLPATH%\$OEM$\text
mode;Drivers\HP_NULL_IPMI;Drivers\HP_SmartArray_E200i_SAS;Drivers\
Intel_chipset;Drivers\ "
For both Windows XP-32 and Windows XP-64, the path for the NVIDIA driver is intentionally
The ATI drivers that are downloadable from the blade workstation software and drivers web
Other settings:
OemPreinstall=Yes
DisableVirtualOemDevices=Yes
DriverSigningPolicy=Yes
[MassStorageDrivers]
"Windows Driver for Smart Array SAS/SATA Controllers"="OEM"
[OEMBootFiles]
txtsetup.oem
hpcisss2.cat
hpcisss2.sys
hpcissx2.inf
[GuiUnattended]
AutoLogonCount=2
[NetOptionalComponents]
SNMP = 1
[GuiRunOnce]
"%systemdrive%\HP_Install\Driver_Software_Install2.cmd"
Performing an unattended installation of Windows XP-32 and Windows XP-64 63