HP ProLiant xw2x220c - Blade Workstation Administrator's Manual page 62

5. Next, add blade workstation-specific entries to the different sections of the unattended answer file, either
unattend.txt or ristndrd.sif (for RIS installation). The following entries are based on the example directories
created in step 2, and will need to be adapted to your configuration if it differs from the directories shown
in step 2.
NOTE: ee Microsoft documentation for additional details on the creation of the unattended.txt file.
S
Windows XP Pro SP2
a.
Add to the [Unattended] section
•
Plug and Play driver location:
OemPNPDriversPath=\textmode;HP_Install\Drivers\chipset\intel;HP_In
stall\Drivers\graphics\ati;HP_Install\Drivers\Management\IMA;HP_In
stall\Drivers\Management\ILO_MC;HP_Install\Drivers\Management\ILO_
MI;HP_Install\Drivers\network\Broadcom
Other settings:
OemPreinstall=Yes
DisableVirtualOemDevices=Yes
DriverSigningPolicy=Yes
• Add to the [MassStorageDrivers] section
[MassStorageDrivers]
"Windows 2000 Driver for Smart Array E200 and E200i
Controllers"=OEM
Add to the [OEMBootFiles] section
•
[OEMBootFiles]
CISSm2.sys
HpCISSx2.inf
HpCISSm2.cat
txtsetup.oem
• Add to the [GuiUnattended] section
[GuiUnattended]
AutoLogonCount=2
• Add to the [NetOptionalComponents] section
[NetOptionalComponents]
SNMP = 1
NOTE: The above entry installs SNMP during setup. This is required in order for the management agents to
install.
Add to the [GuiRunOnce] section
•
[GuiRunOnce]
"%systemdrive%\HP_Install\Driver_Software_Install2.cmd"
The above entry will run the install script "Driver_Software_Install.cmd" (see Appendices) that will
install drivers and software at first login after install.
Add to the [WindowsFirewall] section
•
[WindowsFirewall]
Profiles = WindowsFirewall.TurnOffFirewall
[WindowsFirewall.TurnOffFirewall]
Mode = 0
In the above firewall example, the Windows firewall is disabled (refer to Windows documentation on
firewall settings). In practice, it is not recommended to disable the Windows firewall unless another
firewall is in use. Refer to Section 4-2-4,
settings.
"Configuring the operating
Performing an unattended installation of Windows XP-32 and Windows XP-64 62
system," for recommended firewall