3-4-2 iLO 2 network verification
To validate iLO 2 network access, you first need to know the iLO 2 IP address. There are several ways to
determine this:
Reboot the blade. During the reboot, the boot console displays the iLO 2 IP address, as shown in Figure 3-6
•
(10.10.42.60).
Figure 3-6
Boot console display of the iLO 2 IP address
•
Log into SMH, and click Embedded NEC98431 under Management Processor, which displays the iLO 2 IP
address.
Use Onboard Administrator, as described in Section 12-1,
•
To validate iLO 2 network access, point your PC browser window to the iLO 2 IP address (again, using HTTPS).
This should display the login screen shown in Figure 3-7. For more information about iLO 2, see Section 12-2,
"Integrated Lights-Out 2 (iLO
Figure 3-7
iLO 2 login screen
2)."
Installing, powering on, booting, and validating the blade workstation solution 28
"Onboard
Administrator."