12-2-4 iLO 2 virtual media
The iLO 2 Virtual Media screen allows you to connect a floppy drive, USB key, or CD/DVD drive to the blade
workstation from your local PC. To create this connection, perform the following steps:
1.
Click the iLO 2 Virtual Devices tab.
2.
Click the Virtual Media link.
3.
Select the media on your PC to connect to the blade workstation and click the Connect button.
In Figure 12-9, a USB key (device E:) is connected to the blade workstation.
Figure 12-9
Connecting virtual media
Managing the blade workstation 82