5.
Insert a straightened paper clip (1) into the release access opening in the bezel.
6.
Press the release tab (2) and remove the bezel from the tab side (3).
7.
Remove the bezel (4) from the optical drive.
Reverse this procedure to reassemble and install the optical drive.
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive cable, hard drive bumpers, or
hard drive bracket and screws.
Description
Supports the following 9.50 mm, 6.35 cm (2.50 in) SATA hard drives:
1 TB, 5400 rpm
750 GB, 7200 rpm
750 GB, 5400 rpm
640 GB, 5400 rpm
500 GB, 7200 rpm
500 GB, 5400 rpm
320 GB, 5400 rpm
Supports the following 7.00 mm, 6.35 cm (2.50 in) SATA hard drives:
320 GB, 5400 rpm
Hard drive hardware kit (includes hard drive cable, hard drive bumpers, and hard drive bracket and
screws)
44
Chapter 4 Removal and replacement procedures
Spare part number
676521-001
633252-001
634250-001
669300-001
634925-001
669299-001
622643-001
645193-001
682745-001
ENWW