4.
Lift the speakers from the top cover (4).
Reverse this procedure to install the speakers.
Power button board
Description
Power button board
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
6.
Remove the optical drive (see
7.
Remove the hard drive (see
8.
Remove the keyboard (see
9.
Remove the top cover (see
10.
Remove the speakers (see
ENWW
Battery on page
40).
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page
51).
Top cover on page
56).
Speakers on page
60).
41).
42).
44).
Component replacement procedures
Spare part number
683549–001
61