Sample X*Screens Files - HP c3700 - Workstation Administration Manual

Figure 2-1
Chapter 2
MinimumMonitorPowerSaveLevel <value>
Specify the minimum power save level to be used by the monitor during screen
blanking. You must specify a level of 0 -3 If the option is not used, the default is
level 0. On devices that do not support DPMS, this option will be ignored.
ScreenOptions
Screen options are device-dependent options that are documented in a file in the X
Server information directory (for example,
/usr/lib/X11/Xserver/info/screens/hp).

sample X*screens files

Below are several sample X*screens files that illustrate the new format.
•
This is the minimum legal X*screens file, the "Screen" keyword followed by
the screen device. Since no other information is given, the X Server will assume
default values for other options and settings.
Screen /dev/crt
Results of minimal legal X*screens file
< host >:0.0
•
This is the minimum specification for a two-screen configuration. The
maximum number of screens supported on the X Server is four. Here, the
displays associated with /dev/crt0 and /dev/crt1 are referred to as
"<host>:0.0" and "<host>:0.1", respectively.
Screen /dev/crt0
Screen /dev/crt1
configuring X Windows on HP-UX (HP Visualize graphics cards)
/dev/crt
X Server configuration
15