HP c3700 - Workstation Administration Manual page 44

configuring X Windows on HP-UX (other graphics cards)
the XF86Config file
42
where <trans> is the transport type to use to connect to the font server
(e.g., Unix for UNIX-domain sockets or tcp for a TCP/IP connection),
<hostname> is the hostname of the machine running the font server, and
<port-number> is the port number that the font server is listening on
(usually 7000). The default Font Path is:
tcp:/7000,
/usr/lib/X11/fonts/hp_roman8/75dpi/,
/usr/lib/X11/fonts/iso_8859.1/100dpi/,
/usr/lib/X11/fonts/iso_8859.1/75dpi/,
/usr/lib/X11/fonts/hp_kana8/,
/usr/lib/X11/fonts/hp_japanese/100dpi/,
/usr/lib/X11/fonts/hp_japanese/75dpi/,
/usr/lib/X11/fonts/hp_korean/75dpi/,
/usr/lib/X11/fonts/hp_chinese_s/75dpi/,
/usr/lib/X11/fonts/hp_chinese_t/75dpi/,
/usr/lib/X11/fonts/iso_8859.2/75dpi/,
/usr/lib/X11/fonts/iso_8859.5/75dpi/,
/usr/lib/X11/fonts/iso_8859.6/75dpi/,
/usr/lib/X11/fonts/iso_8859.7/75dpi/
/usr/lib/X11/fonts/iso_8859.8/75dpi/,
/usr/lib/X11/fonts/iso_8859.9/75dpi/,
/usr/lib/X11/fonts/misc/
Xf86 uses ModulePaths as locations to look for loadable modules. The
default ModulePath is:
/usr/lib/X11/Xserver/modules/xf86/,
/opt/graphics/common/lib/
RgbPath can be used to specify the RGB database path. Normally it is
never changed. If it is not specified the built-in path /etc/X11/rgb is
used.
In addition, the LogPath can be specified, if server logging information
is to be sent somewhere other than the default log file. The default logfile
is located at /var/X11/Xserver/logs/Xf86.n.log, where n is the
display number.
All names must be enclosed within double quotes. There may be only one
Files section in the config file. This section does not recognize Option as
a keyword.
Chapter 3