HP c3700 - Workstation Administration Manual page 48

configuring X Windows on HP-UX (other graphics cards)
the XF86Config file
46
ServerLayout section. If neither of these is present, the first Screen
section found in the configuration file is considered the active one.
Screen sections have the following format:
Section ìScreenî
Identifier ìScreenIDî
Device
Monitor
DefaultDepth
Option ...
.
.
SubSection ìDisplayî
.
.
EndSubSection
.
EndSection
The Identifier entry specifies the unique name for this screen. The
Identifier generally must match a ScreenID listed in the active
ServerLayout section. The Screen section provides information
specific to the whole screen, including screen-specific Options. In
multi-screen configurations, there will be multiple active Screen
sections, one for each head.
The Device keyword specifies which Device section to be used for this
screen. This is what binds a specific graphics card to a screen. The
DeviceID must match the Identifier of a Device section in the
configuration file.
The Monitor keyword specifies which Monitor section is to be used for
this screen. This is what binds a specific monitor to the screen. The
MonitorID must match the Identifier of a Monitor section in the
configuration file.
The DefaultDepth keyword specifies which color depth the server
should use by default. The -depth command line option can be used to
override this. If neither is specified, the default depth is driver-specific,
but in most cases is 8.
ìDeviceIDî
ìMonitorIDî
<Depth>
Chapter 3