Installation and Safety Guide
AR440S, AR441S, AR442S Routers
This section describes how to install the AR440S, AR441S and AR442S routers.
"Installing the AR440S, AR441S, AR442S"
■
"Configuring the AR440S, AR441S, AR442S" on page 29
■
■
"Connecting Data Cables to AR440S, AR441S, AR442S" on page 35
"System LEDs on AR440S, AR441S, AR442S" on page 36
■
For corresponding information about installing an AR415S, see
page
15.
For corresponding information about installing an AR450S, see
on page
7.
Installing the AR440S, AR441S, AR442S
Selecting a Site
You can install the router:
on a level surface such as a desktop or bench
■
in a standard 19-inch rack, using the rack-mount kit supplied with the router
■
on a firm wall, using a wall-mount kit ordered from your authorised Allied
■
Telesis distributor or reseller
When you install the router, choose a site that:
allows adequate airflow around the router and its vents
■
is free of dust and moisture
■
AR440S, AR441S, AR442S: will maintain an ambient temperature in the range
■
0 ºC to 50 ºC (32 ºF to 122 ºF)
will maintain a humidity in the range 5% to 80% non-condensing
■
has a reliable and earthed (grounded) power supply, preferably dedicated and
■
filtered
does not expose cabling to sources of electrical noise such as radio transmitters,
■
broadband amplifiers, power lines, electric motors, and fluorescent fixtures
allows easy access to the router's power and cable connections
■
Before Installing the Router
Read the safety information
■
Unpack the router. Verify the package contents. If any items are damaged or
■
missing, contact your sales representative.
below
"Safety" on page
41.
25
"AR415S Router" on
"AR450S Routers"
613-000313 Rev C