Load the paper into the paper feeding
6
tray with the print side up. Make sure the
paper stack sits below the hook (A) on the
side paper guide.
Adjust the paper guide rail to match the
7
size of paper.
Aligning the protrusions (A) on the both
8
sides of the dust cover to the guides (B)
inside the machine, set the dust cover.
In the Multi-Purpose Tray
In the Multi-Purpose Tray
Use the multi-purpose tray when you want to copy
or print on the diff erent paper which is in the paper
cassette. Load paper one by one in the multi-
purpose tray.
–
The paper in the multi-purpose tray is fed prior to the paper in
the paper cassette.
–
The recommended envelopes are COM10 (#10), MONARCH,
DL, and ISOC5. Using other envelopes may aff ect the quality
of the printout.
–
Make sure to set the correct paper size in the printer driver.
–
When printing received documents or reports, paper can be
fed only from the paper cassette. If paper is loaded into the
multi-purpose tray, <REMOVE MP PAPER> appears.
For MF4370dn
Spread the paper guides a little wider
1
than the actual paper width.
Loading Paper
2-11