Canon D480 - ImageCLASS B/W Laser Basic Operation Manual page 119

Specifying Destinations
Place documents.
1
Press [Menu].
2
Press [ ] or [
3
<BROADCAST>, then press [OK].
M E N U
3 B R O A D C A S T
Specify the destination.
4
N O . 0 0 1 =
Use – ,
one-touch keys, coded dial codes, or
[Address Book] to specify destinations.
– You can enter up to 16 diff erent fax numbers
using –
– Make sure to press [OK] after entering the
recipient's number if you use
keys].
5-22
] to select
[numeric keys] and [Tone],
, [numeric keys] and [Tone].
– [numeric
Repeat step 4 to enter all required
5
recipients.
To check all the specifi ed destinations, press [
or [ ] to scroll the display.
Press [Start].
6
When you place the documents on the platen
glass, press [ ] or [
size, then press
When scanning is complete, press [OK] to start
sending.
If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in
<SYSTEM SETTINGS> is set to <ON> and you
specify a fax number using
keys] and [Tone], you need to enter the fax
number again for comfi rmation, then press [OK].
] to select the document
[Start] for each document.
– , [numeric
]