Timer Settings; Setting The Sleep Mode - Canon D480 - ImageCLASS B/W Laser Basic Operation Manual

Timer Settings

Timer Settings

Timer Settings
The timer settings enables you to set the Sleep Mode and the Daylight Saving Time.

Setting the Sleep Mode

Setting the Sleep Mode

If the machine remains idle for a certain period of
time, it automatically enters the Sleep mode.
The default settings are as follows:
– <AUTO SLEEP>: ON
– <AUTO SLEEP TIME>: 5MIN.
Press [Menu].
1
Press [ ] or [
2
SETTINGS>, then press [OK].
M E N U
8 T I M E R
Press [ ] or [
3
SLEEP>, then press [OK].
A U T O S L E E P
Press [ ] or [
4
press [OK].
A U T O S L E E P
] to select <TIMER
S E T T I N G S
] to select <AUTO
O N
] to select <ON>, then
O N
Press [ ] or [
5
interval, then press [OK].
A U T O S L E E P
– You can set the interval from 3 to 30 minutes
(in one-minute increments).
– You can also enter values using
[numeric keys].
Press [Stop/Reset] to return to the
6
standby mode.
[Energy Saver] lights green when the
–
machine enters the Sleep mode.
– To enter the Sleep mode manually, press
[Energy Saver] on the operation panel.
– The machine will not enter the Sleep mode
when:
• the machine is in operation
• the Processing/Data indicator lights or blinks
• a message appears on the display and the
Error indicator blinks
• paper is loaded in the multi-purpose tray
• a paper jam occurs in the machine
• the handset of the external telephone is off
the hook
– The machine will leave the Sleep mode when:
• you press
panel
• a fax is received
• the handset of the external telephone is off
the hook
• a print job is sent from a computer, and the
print is started
] to select the desired
T I M E
5 M I N .
–
[Energy Saver] on the operation
1-15