Canon D480 - ImageCLASS B/W Laser Basic Operation Manual page 87

Collating Copies
Press
3
C O L L A T E / 2
– If you want to use <COLLATE> and "2 on 1
Combination" (see p. 4-15) at the same time,
select <COLLATE+2 ON 1>, then press [OK].
– If you want to use <COLLATE> and the 2-
sided copying at the same time, go to step 3
of "1 to 2-Sided Copying" (see p. 4-19).
Use –
4
desired copy quantity (1 to 99).
6 3 %
Press [Start].
5
– If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning
is complete, press [OK].
– The machine prints the remaining sets of
copies.
– To cancel all settings, press
– When you switch the mode by pressing the
mode keys such as
be canceled. If you want to keep the settings,
set the collate mode as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <AUTO COLLATE> → <ON> (See
"COPY SETTINGS, " on p. 12-5.)"
– When scanning multiple page documents,
<MEMORY FULL> may appear in the display
and scanning may be canceled. If this happens,
press [Stop/Reset] to return to the standby
mode.
4-14
[Collate/2 on 1].
O N 1
C O L L A T E
[numeric keys] to enter the
* L T R
T E X T / P H O T O
[Stop/Reset].
[FAX], all settings will
1