Hardware Monitor - Asus P2B-D User Manual

III. INSTALLATION
Jumpers
1) CLRTC
2) KBPK
3) FS0, FS1, FS2
4) BF0, BF1, BF2, BF3
5) JP18
Expansion Slots/Sockets
1) DIMM Sockets
2) SEC CPU Slot
3) SLOT1, SLOT2
4) PCI1, PCI2, PCI3, PCI4
5) AGP

Hardware Monitor

1) JP4, JP5
Connectors
1) PS2KBMS
2) PS2KBMS
3) PRINTER
4) COM1/COM2
5) FLOPPY
6) USB
7) Primary/Secondary IDE
8) IDELED
9) CHA_/CPU_/PWR_FAN
10) IR
11) ATXPWR
12) WOLCON
13) CHASSIS
14) MSG.LED (PANEL)
15) SMI (PANEL)
16) PWR.SW (PANEL)
17) RESET (PANEL)
18) PWR.LED (PANEL)
19) KEYLOCK (PANEL)
20) SPEAKER (PANEL)
21) SCSI-50/SCSI-68/ULTRA2-68 p. 33 Ultra-Fast (50-)/-Wide (68-)/Ultra2 (68-pin) SCSI Connectors
22) DMA_HEADER
23) SMB
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not use this
address, otherwise conflicts will occur.
O/R: Optional/Reserved for future use.
ASUS P2B-D/P2B-DS User's Manual
p. 13 Clear Real Time Clock (RTC) RAM
p. 13 Keyboard Power Up (Enable/Disable)
p. 14 CPU Bus Frequency
p. 14 CPU Core:Bus Frequency Multiple
p. 15 Chassis Intrusion Sensor Setting (Enable/Disable)
p. 18 DIMM Memory Support
p. 19 Single Edge Contact CPU Support
p. 24 16-bit ISA Bus Expansion Slots
p. 25 32-bit PCI Bus Expansion Slots
p. 25 Accelerated Graphics Port
p. 23 CPU heat Sensor Connector (O/R)
p. 26 PS/2 Keyboard Connector (6-pin female)
p. 26 PS/2 Mouse Connector (6-pin female)
p. 27 Parallel (Printer) Port Connector (25-pin female)
p. 27 Serial Port COM1/COM2 (two 9-pin male)
p. 27 Floppy Drive Connector (34-1 pins)
p. 28 Universal Serial BUS Ports 1 & 2 (two 4-pin female)
p. 28 Primary/Secondary IDE Connector (40 pins)
p. 29 IDE/SCSI LED Activity Light (2 pins)
p. 29 Chassis/CPU/Power Supply Fan Connectors (3-pin block)
p. 30 Infrared Port Module Connector (5 pins)
p. 30 ATX Motherboard Power Connector (20 pins)
p. 31 Wake-On-LAN Connector (3 pins)
p. 31 Chassis Intrusion Sensor Lead (4-1 pins) (O/R)
p. 32 LED Lead (2 pins)
p. 32 SMI Suspend Switch Lead (2 pins)
p. 32 ATX Power Switch / Soft Power Switch (2 pins)
p. 32 Reset Switch Lead (2 pins)
p. 32 System Power LED (3 pins)
p. 32 Keyboard Lock Switch Lead (2 pins)
p. 32 Speaker Connector (4 pins)
p. 34 SB-LINK™ Connector (6-1 pins) (O/R)
p. 34 SMBus Connector (3 pins) (O/R)
*
†
11