Table of Contents
Advertisement
Power Up By PS/2 Keyboard [Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specific keys
on the PS/2 keyboard to turn on the system. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-ESC] [Power Key]
4.5.4
Hardware Monitor
The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Hardware Monitor
CPU Fan Type
CPU Q-Fan Control
CPU Q-Fan Profile
Chassis Q-Fan Control
Chassis Q-Fan Profile
Vcore Voltage
3.3V Voltage
5V Voltage
12V Voltage
CPU Temperature
M/B Temperature
CPU Fan Speed
CHA_FAN1 Speed
PWR_FAN Speed
CPU Fan Speed Warning
↑↓ : Select Item
F1:Help
→←: Select Menu
ESC: Exit
CPU Fan Type [DC]
Allows you to select the CPU fan type you installed on the motherboard.
Configuration options: [DC] [PWM]
•
If you install a PWM (4-pin) fan but set this item to [DC], the fan you
installed may not work.
•
If you install a DC (3-pin) fan but set this item to a [PWM], the Q-Fan
Control function will not work and the fan you install will always run at full
speed.
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU Q-Fan controller.
Configuration options: [Disabled] [Enabled]
The CPU Q-Fan Profile item becomes user-configurable when you enable the
CPU Q-Fan Control feature.
ASUS M3N-H/HDMI
Phoenix-Award BIOS CMOS Setup Utility
Power
[DC]
[Disabled]
Performance
[Disabled]
Performance
[ 1.16V]
[ 3.31V]
[ 4.97V]
[11.96V]
39ºC
33ºC
2922 RPM
0 RPM
0 RPM
[800 RPM]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
F10: Save and Exit
4-29
Advertisement
Table of Contents
