Installation And Adjustment - Haier HWM65-728 User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is very important
to your security and correct operating the machine.
After opening the package, please lean the washing machine gently down on soft items
(like towel cloth,blanket, etc.). Install the bottom plate to the bottom of the machine with
screws by a cross screwdriver, then lift the machine up gently. See to the gure: (Please
rst pull off the power plug from the receptacle before installing.)
The washing machine away from wall should be overrun 20mm. The largest allowable slope
of the shank base of the machine is 2°. The slanting or rough ground will result in unstable
running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is horizontal.
Adjust the adjustable foot:
1. To twist the adjustable foot, please rst lift up the side of the leg slightly, loosen the
adjustable nut, and twist the foot. Please make sure to keep the washing machine
in balance.
2. After adjustment, fasten the nut.
Back
Front
Screw
Bottom plate
Carpet
The adjustable foot
5