Remote Control - Dynex DX-40L130A11 User Manual

DX-32L-37L-46L150A11_09-0919.book Page 7 Tuesday, November 24, 2009 11:42 AM
TV components

Remote control

1
2
3
4
5
6
7
8
9
10
11
12
13
Item Name Description
Press to turn on the TV or put the TV in standby
mode.
1
POWER
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
Press to open the INPUT SOURCE menu. For
2 INPUT more information, see "Selecting the video
input source" on page 13.
Press the number buttons to enter channel
numbers or the parental control password.
Press the dot button to select a digital
3 Numbers/.
sub-channel.
For more information, see "Selecting a channel"
on page 13.
Press to display the information banner. For
4 INFO more information, see "Displaying program
information" on page 13.
Item Name
5
6 ENTER
7 MENU
8 MUTE
9 VOL+ / VOL–
14
15
COMP/HDMI/
10 VIDEO/TV/
VGA
16
11 SLEEP
17
12 ZOOM
18
13 PICTURE
19
20
14 RECALL
21
22
15 GUIDE
16 EXIT
17
CH / CH
18 FAVORITE
19 MTS/SAP
20 CH-LIST
21 CCD
22 AUDIO
DX-32L/37L/40L/46L
Description
Press or to move up or down in on-screen
menus.
Press or to move left or right in on-screen
menus or to adjust menu settings.
Press to confirm selections in on-screen menus
or to open sub-menus.
Press to open the on-screen menu.
Press to mute the sound. Press again to restore
the sound.
Press to increase or decrease the volume.
Press to select the input source:
• Press COMP repeatedly to cycle between
COMPONENT inputs.
• Press HDMI once to select HDMI1. Press
HDMI twice to select HDMI2. Press HDMI
three times to select HDMI3.
• Press VIDEO once to select AV1 IN. Press
VIDEO twice to select AV2 IN. Press VIDEO
three times to select S-VIDEO1. Press
VIDEO four times to select S-VIDEO2.
• Press TV to switch to TV mode.
• Press VGA to view a computer connected to
your TV.
Press to set the sleep timer. For more
information, see "Setting the sleep timer" on
page 27.
Press to select the screen aspect ratio. You can
select Auto, Normal, Zoom, Wide, and
Cinema. For more information, see "Adjusting
the TV picture" on page 15.
Press to select the picture mode. You can select
Vivid, Standard, Theater, Sports, Energy
Saving, and Custom. For more information, see
"Adjusting the TV picture" on page 15.
Press to go to the last viewed channel. For more
information, see "Selecting a channel" on page
13.
Press to open the DTV program guide (if
available). For more information, see
"Displaying program information" on page 13.
Press to close the on-screen menu.
Press to go to the next or previous channel in
the channel list. For more information, see
"Automatically scanning for channels" on
page 17 and "Selecting a channel" on page 13.
Press to open the favorite channel list. For more
information, see "Setting up a favorite channel
list" on page 18.
In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
Press to open the channel list. For more
information see "Selecting a channel" on
page 13.
Press to turn closed captioning on or off. For
more information, see "Turning closed
captioning on or off" on page 24.
Press to select the sound mode. You can select
Standard, Movie, Music, News, or Custom. For
more information, see "Adjusting the sound" on
page 16.
7