Use Round End Capping; Turn Merge On; Raster Photo Mode - Kyocera TASKalfa 2420w Operation Manual

Use Round End Capping

This will set end capping on lines in vector files to
round ends instead of what has been specified in the
plot file's Line Attribute command.

Turn Merge On

This enables the user to merge lines of different
shades. When not applied, the layers within the plot
file determine how lines merge on each other.

Raster Photo Mode

When a raster image has been embedded within a
plot file, Raster Photo Mode should be used.
Raster Photo Mode can be applied to all drawings,
whether they contain raster images or not. Some raster
images may need to be printed in 100% solid rather
than the original shading of the image.
This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or
distributed in any form without express written permission from.
Request Operators Guide
2011.
- 28 -