Selecting An Installation Method; Installing Utilities; Upgrading Driver Components; Express Installation - Kyocera FS-C8650DN Driver Manual

Selecting an Installation Method

Installing Utilities

Upgrading Driver Components

1
2
3

Express Installation

Installing in Express Mode

1
Printer Driver
You can select Express Mode for a network or USB connection and the
installation wizard will discover your printers. You can also select Custom
Mode for a network or USB connection and either manually select installation
packages and specify utilities or let the installation wizard discover your printer.
Express Mode Installation
Installing in Express Mode
Custom Mode Installation
Installing in Custom Mode with a Network Connection using Discover
page 1-4
Installing in Custom Mode with a USB Connection using Discover
5
Installing in Custom Mode with a Network Connection using Custom Select
on page 1-7
Installing in Custom Mode with a USB Connection using Custom Select
page 1-8
On the Installation Method page, click Utilities to install printer utilities. You
can also select utilities to install during the Custom Installation procedure.
If the installation wizard detects older driver or utility components, the Software
Component Upgrade page appears.
Choose the component to upgrade. Click Next.
Confirm your upgrade settings. To start the upgrade, click Upgrade.
When the upgrade completes, click Next. The Installation Method page
appears.
Express Mode applies to driver installation for a USB or network connection
only. The installation wizard discovers printers that are turned on, and
connected by USB or network cable. In Custom Mode, you are able to select
the installation packages and specify the port.
This section describes the express installation procedure of the driver software
in Windows operating systems.
Ensure that your printer and computer are turned on and connected by USB or
network cable.
on page 1-2
Installation
on
on page 1-
on
1-2