Send Count Information; Send Application Name; Associate Profile With Application; Password Protect Administrator Settings - Kyocera FS-2100DN Driver Manual

Device Settings

Send Count Information

Send Application Name

Associate Profile with Application

Password Protect Administrator Settings

Setting the Administrator Password
1
2
Clearing the Administrator Password
1
2-5
This option lets you embed count information in the print job, which can be used
by some applications for accounting purposes. Count information includes the
number of copies produced as well as duplex printing, multiple pages per sheet,
color mode, color page count, and paper size values.
When PDF is selected in the PDL settings dialog box, only color page count
information is sent with PDF.
To enable this feature, in Device Settings > Administrator Settings >
General, select Send Count information.
This option lets you send the application name with a print job, so that a
different printing process is used for each application.
This option is unavailable if PDF is selected in the PDL Settings dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Send Application name.
This option lets you set all printing from each installed application to use the
same driver settings as defined in a profile. Before using this feature:
A profile must be created in the Profiles dialog box, accessed from any
Printing Preferences tab.
An association must be created between a profile and an application in the
Application Based Printing dialog box, accessed from the Profiles dialog
box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Associate Profile with application.
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. If
selected, this setting prompts you to enter a password and confirm the
password. This password protection blocks access to all Administrator
Settings options.
You can set a password to prevent unauthorized changes in the Administrator
Settings dialog box.
In Device Settings > Administrator > General, select Password protect
administrator settings.
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
You can remove the administrator password.
In Device Settings, click Administrator.
User Guide