Adjusting Security Watermark Calibration; Selecting Pages For Security Watermark - Kyocera FS-C8650DN Driver Manual

8
9
10

Adjusting Security Watermark Calibration

1
2
3
4
5
6
7

Selecting Pages for Security Watermark

Printer Driver
Select a Watermark color for the security watermark from the list. The options
are Black, Cyan, or Magenta.
When selecting Color Mode > Black & White in the Imaging tab, the only
option for watermark colors is black.
For Security Watermark, Overprint is set by default. The security watermark is
printed over the document data so that it can appear clearly in a photocopy.
Adjust the calibration. After adjusting calibration in all dialog boxes click OK.
For a security watermark to be effective, it must be nearly invisible in a printed
page and clearly visible in a photocopied page. Because printing systems and
driver settings can vary, you must adjust the calibration before printing a
security watermark. Adjusting the calibration is also recommended when
changing the background pattern, replacing the toner or printing system, and
after heavy printing activity.
In Advanced > Security Watermark, click Add to create a custom security
watermark; or under Select security watermark, select a default or custom
security watermark and click Edit.
After all security watermark options are selected in the Add Security
Watermark or Edit Security Watermark dialog box, click Adjust Calibration.
Under Pattern shading and Text contrast, select initial options:
Light, Normal, Dark
Select the shading density of the background pattern.
Contrast 1-9
Select the level of contrast against the background pattern, from lightest to
darkest.
These selections may need to be changed after printing a sample in the next
step.
Click Print Sample to print a page displaying all nine contrast options against
the selected pattern shading. It is recommended to print a sample page for each
pattern shading option.
From the Text Contrast Sheet, find the sample where the security watermark is
most nearly invisible.
In the Adjust Calibration dialog box, select options to match the sample
chosen in step 5.
In all dialog boxes, click OK.
The Page selection options for security watermark determine where the
security watermarks are placed in the print job.
Advanced
10-7