Offset Jobs - Kyocera FS-C8500DN User Manual

Finishing

Offset Jobs

Offsetting Jobs
1
2
3
4
6-6
The Offset jobs feature physically shifts each print job in the output tray.
To ensure consistent offset stacking, all users printing to the same printing
system should select Offset jobs as the default setting.
The Offset jobs feature requires a finishing device to be selected under Device
options in the Device Settings tab. It does not work with Staple feature.
In the Basic tab, under Destination, select a face-down finishing tray.
Open the Finishing tab, then select Separation > Offset jobs.
Click OK to return to the Print dialog box.
Click OK to start printing.
User Guide