Adjusting Color; Adjusting Hsl (Hue, Saturation, Lightness) - Kyocera FS-C8500DN User Manual

12
13

Adjusting Color

1
2
3
4
5
6

Adjusting HSL (Hue, Saturation, Lightness)

1
2
3
KX DRIVER
Select the desired color profile and click Set as Default Profile.
Click Close.
Color Adjustment enables you to customize the two color spaces in the driver
and save up to three custom groups. Color space changes can be made to red,
green, blue (RGB) levels or to hue, saturation and lightness (HSL).
In the Imaging tab, in Color mode, select Color (CMYK).
In the Adjustment list, select Custom 1, Custom 2, or Custom 3, if you have
already defined color settings. If you have not defined color settings, select Edit
to open the Adjustment Settings dialog box.
From the Custom color adjustment list, select Custom 1, Custom 2, or
Custom 3.
To open the Custom Color Adjustment dialog box, click Settings.
Select HSL (hue, saturation and lightness) or RGB (red, green, blue) to work
with as the color space.
Click the arrow buttons beneath the photograph to select one of three different
images. Different colors are emphasized in each of the photographs to aid in the
color adjustment process.
HSL controls adjust the full spectrum, brightness, contrast, and vividness of the
color.
Under Select color space, select HSL (hue, saturation and lightness).
Adjust the distribution and balance of hues.
For coordinated hue adjustment, from the Modify list select Master. Drag the
Hue slider to the right or left to increase or decrease the value between -180
and +180.
For specific hue adjustment, from the Modify list select Red, Yellow, Green,
Cyan, Blue, or Magenta. Drag the Hue slider to the right or left to increase or
decrease the value between -10 and +10.
The upper color bar indicates the adjustment made when the slider is dragged,
or a value is typed in the box. The horizontal brackets around the upper color
bar show the range of the color bar affected by the adjustment.
The lower color bar provides a reference point to the color bar above it for Hue
Adjustment.
Drag each slider to adjust the Saturation, Lightness and Contrast between
-10 and +10. You can also type values in the boxes.
Imaging
7-9