Internet Fax; Selecting From The Log - Konica Minolta bizhub C35 User Manual

4
Press [OK].
If [Admin Settings] - [Fax Settings] - [Fax Function Settings] - [Cofirm
Addr (TX)] is set to [ON], the fax number must be entered again after
[OK] is pressed.
To specify multiple destinations for a broadcast transmission, press
[Next Dest.] after the fax number was entered, and then type in the
next fax number.
If the machine is being used with a PBX, press [Pause] after the out-
side line access number (for example, [0]) for reliable dialing when
transmitting from an inside line to an outside line.

Internet fax

1
In the initial Fax screen, press [Direct Input].
2
Press [Internet Fax].
3
Type in the E-mail address.
4
Press [OK].
To specify multiple destinations, specify all destinations where the
data is to be sent.

Selecting from the log

A destination can be selected from the log of the last five transmissions.
1
In the initial Fax screen, press [Others].
2
Press [Log].
3
Select the destination, and then press [OK].
Only addresses that have been directly typed in remain in the log.
Selecting destinations from the log is possible only for jobs with a sin-
gle destination.
When the machine is turned off, the transmission log is cleared.
If [Admin Settings] - [Fax Settings] - [Fax Function Settings] - [Cofirm
Addr (TX)] is set to [ON], a destination cannot be selected from the
log.
If [Admin Settings] - [Security Settings] - [Security Details] - [Disable
Job History Display] is set to [ON], a destination cannot be selected
from the log.
Specifying destinations 3-9