Selecting With An Ldap Search - Konica Minolta bizhub C35 User Manual

The following types of transmissions are not recorded in the log.
· PC faxing
· Fax forwarding and E-mail forwarding
· Transmissions recovered after the machine is turned off, then on
again
· Transmissions where the address is directly typed in while the
machine is off-hook

Selecting with an LDAP search

Destinations can be selected after searching an LDAP server. This can be
used if the network contains an LDAP server, for example, for user manage-
ment.
In order to perform an LDAP search, the LDAP server must be regis-
tered with the machine. For details, refer to the [Reference Guide].
Internet faxing is not compatible with a destination search of an LDAP
server.
1
In the initial Fax screen, press
2
Press [LDAP].
3
Select the search method, and then perform the search.
–
[Search]: Type in the keyword to be searched for. Press [OK] to begin
searching.
–
[Advanced Search]: Select the appropriate conditions, and then type
in the keyword to be searched for. Press [OK] to begin searching.
4
Select the destination, and then press [OK].
–
To register an address in the address book, select the address from
the address list, and then press [Save].
–
To view the details of an address, select the address from the address
list, and then press [Details].
–
To specify multiple destinations for a broadcast transmission, select all
destinations where the fax is to be sent.
3-10
.
Specifying destinations