Konica Minolta bizhub C35 User Manual page 36

Item
[Redial]
[Redial Interval]
[Line Monitor]
[Line Monitor Volume] Settings
[Ring Pattern]
[Fax Settings] (Admin Settings)
Description
Settings [0] - [10] ([1])
Specify the number of times this machine automati-
cally redials when a fax could not be sent correctly,
for example, if the line is busy or a communication
error occurred.
The available settings and the default setting
differ depending on the setting selected for
[Admin Settings] - [Fax Settings] - [Fax Target].
Settings [2] - [15] ([2])
Select the length of the interval (in minutes) between
redial attempts when the machine automatically redi-
als.
The available settings and the default setting
differ depending on the setting selected for
[Admin Settings] - [Fax Settings] - [Fax Target].
Settings [OFF] / [Until Connection Complete] /
[Until Transmission Complete]
Select whether the line monitoring tone is produced
during communication.
[OFF]: No line monitoring tone is produced.
[Until Connection Complete]: The line monitoring
tone is produced until the connection with the desti-
nation has been completed after dialing.
[Until Transmission Complete]: The line monitoring
tone is produced until the fax transmission has been
completed after dialing.
[Low] / [Medium] / [High]
Select the volume of the line monitoring tone.
Settings [Normal Ring] / [Double] / [Triple 1] /
[Triple 2]
Select the ring pattern for faxing when [RX Mode] is
set to [DRPD].
For details on the settings, refer to "[Ring
Pattern]" on page 4-4.
2-11