Security Function Ver. 1.02 Jul. 2010
4. Lift up the cover [2] of the USB port.
5. Insert the USB memory device to the USB port [3] for service.
NOTE
• USB memory must be connected with the main power switch/sub power switch
off.
• When updating the firmware, use the USB port for the service.
It cannot be updated when connected to another USB port.
6. Turn ON the main power switch and the sub power switch.
7. Control panel shows F/W items to be updated, and select the particular type of F/W to
be updated. (Select [YES].)
[2]
[1]
10. Firmware rewriting
[3]
A0EDF2C247DA
A0EDF2C514DA
29