Konica Minolta bizhub C280 Service Manual page 22

8. Service Mode functions
5. Type the 8-digit password to be newly used from the keyboard shown on the display
and touch [END].
NOTE
• For the CE Password, set a value other than the default.
• Quitting the Service Mode after the new password has been set will validate the
setting of the new password.
• NEVER forget the CE password. When forgetting the CE password, call responsi-
ble person of KMBT.
6. Retype the new CE password and touch [END].
NOTE
• If there is a mismatch in the CE Password between that typed first and that just
typed, the machine displays a message telling that the CE Password entered is
wrong. In this case, set the CE Password once again.
Characters and symbols to be used for the CE password
• Numeric characters: 0 to 9
• Alpha characters: upper and lower case letters
• Symbols: !, #, $, %, &, ', (, ), *, ,, -, ., /, :, ;, <, =, >, ?, @, [, \, ], ^, _, ', {, |, }, ~, +
Selectable from among a total of 93 characters
18
Security Function Ver. 1.02 Jul. 2010
A0EDS1E036DA