Konica Minolta bizhub C280 Service Manual page 19

Security Function Ver. 1.02 Jul. 2010
4. Enter the default value "1234567812345678" as the new password from the keyboard
on the screen. Then, touch [END].
NOTE
• Use the default value "1234567812345678" as the password used only temporarily.
5. Enter the new Administrator Password (the default value "1234567812345678") once
again and touch [END].
6. Get the Administrator of the machine to access the Administrator Settings using the
default password. Then, have him or her select the following functions in this order and
change the default password: [Administrator Settings]  [Security Settings]  [Admin-
istrator Password].
8. Service Mode functions
A0EDS1E034DA
15