Table of Contents
Advertisement
DESIGN Brick 70™
Mounting
The Design LED Brick 70™ is fully operational in any mounting position, hanging
upside-down from a ceiling, side mounted, or set on a flat level surface, etc. Be sure this
fixture is kept at least 0.5m away from any flammable materials (decoration etc.). When
clamp mounting; always use and install the supplied safety cable as an added safety
measure to prevent accidental damage in the event of a clamp failure. See the image
below.
Clamp Mounting
The Design Brick 70™ provides a unique mounting bracket assembly that allows the unit to
stand on flat surface, hang on truss via a clamp, or be used in cluster allow multiple units to
rigged together (see the illustration below). Regardless of the mounting option you choose
please refer to the safety guidelines in this manual to avoid damage to the unit and/or injury
to persons.
©Elation Professional, Los Angeles Ca.
12
www.ElationLighting.com
Advertisement
Table of Contents
