3.7.3
BIOS Boot Priority
•
•
Boot
Now BIOS status
BIOS Boot Selection
Forced BIOS Boot from
BIOS1
BIOS2
Now BIOS status
Shows "BIOS1" or "BIOS2" depending on from which BIOS the system boots.
BIOS Boot Selection
Shows "BIOS Menu" to indicate that you make BIOS bootup selection through
BIOS menu rather than by moving the BIOS_FLASHBACK jumper cap.
Forced BIOS Boot from
Allows you to select from which BIOS the system boots. Highlight [BIOS1] or
[BIOS2] and press <Enter>, and the system will reboot.
3-40
This item appears only when you move the BIOS_FLASHBACK jumper
cap to pins 1-2: BIOS MENU.
Refer to 2. BIOS flash setting (6-pin BIOS_FLASHBACK) in 2.6
Jumpers for further information.
: BIOS1
: BIOS Menu
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS1
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
Chapter 4: BIOS setup
Need help?
Do you have a question about the MAXIMUSII/FORMULA - Maximus II Formula Motherboard and is the answer not in the manual?
Questions and answers