Cannot Configure The Settings/Cannot Print According To The Settings; The Printer Driver Settings Have No Effect - Konica Minolta bizhub C220 User Manual

15.2

Cannot configure the settings/Cannot print according to the settings

15.2 Cannot configure the settings/Cannot print according to the set-
tings
Check the following items when you cannot configure settings of the printer driver or cannot print according
to the settings you have configured.
Reference
- Some items for the printer driver may not be configured simultaneously.
15.2.1

The printer driver settings have no effect

Problem
Cannot select items in the print-
er driver.
A "conflict" message saying
"unable to configure" or "func-
tion will be canceled" appears.
Cannot print according to the
settings you have configured.
The watermark cannot be print-
ed.
The staple function cannot be
specified.
Cannot staple.
The stapling position is not as
expected.
Cannot specify the punch func-
tion.
bizhub C360/C280/C220
Possible Cause
Some functions cannot be com-
bined.
You are trying to configure the
functions that cannot be com-
bined.
The settings may not be config-
ured correctly.
The selected functions can be
combined in the printer driver,
but may not be combined in this
machine.
The paper size or paper orienta-
tion specified in the application
may take precedence over the
settings in the printer driver
when printing.
The watermark settings may not
be configured correctly.
The density of the watermark
may be too light.
Some graphic applications do
not print watermarks.
The staple function cannot be
used if the Paper Type is set to
Thick or Transparency.
The staple function requires the
optional Finisher FS-527 or
Finisher FS-529.
When printing a large number of
pages, stapling cannot be per-
formed.
If the document contains pages
of different sizes, stapling can-
not be performed.
The orientation setting is not
correct.
The hole punching cannot be
specified when Booklet, Trans-
parency, Thick 2, Thick 3, or En-
velope is selected as the paper
type.
The optional Finisher FS-527
and Punch Kit are required.
Remedy
Grayed out items cannot be con-
figured.
Check carefully the functions you
have specified, and then specify
the functions that can be com-
bined.
Check the setting of each item of
the printer driver.
Configure settings in the applica-
tion correctly.
Check the watermark settings.
Check the density setting.
When using such a program, the
watermark cannot be printed.
Check the setting of each item of
the printer driver.
Install the required options and
enable them on the printer driver.
Change the number of pages to
be printed.
Check the document.
Check the stapling position in the
printer driver settings.
Check the setting of each item of
the printer driver.
Install the required options and
enable them on the printer driver.
15
15-4