For Network Connection (Lpr); Windows Nt 4.0; Settings For The Machine; Installing The Printer Driver Manually Using The Add Printer Wizard - Konica Minolta bizhub C220 User Manual

5.4

Windows NT 4.0

5.4 Windows NT 4.0
5.4.1

For network connection (LPR)

To use LPR printing, specify the port while installing the printer driver.

Settings for the machine

To use LPR printing, you must configure the network settings for the machine in advance.
Items to be configured
IP address
LPD Setting
d
Reference
For details on the network settings for the machine, refer to the [User's Guide Network Administrator].

Installing the printer driver manually using the Add Printer Wizard

0 Installing the driver to Windows NT 4.0-based computers requires the administrator authority.
0 In Windows NT4.0, to use the LPR port, you must have the [Microsoft TCP/IP Printing] service installed
in your computer.
1
Insert the printer driver CD-ROM for Windows into the CD-ROM drive of the computer.
2
Click [Start], and then select [Settings] - [Printers].
3
Double-click the [Add Printer] icon.
The [Add Printer Wizard] appears.
4
On the page for specifying how the printer is attached, select [This computer].
5
Click [Next >].
A page for selecting a port appears.
6
Click [Add Port...].
7
From the [Available Printer Ports] list, select [LPR Port], and then click [New Port...].
8
Enter the IP address of the machine in the "Address" box, enter "Print" in the "Queue Name" box, and
then click [OK].
% You must discriminate between upper and lower case letters when entering it.
9
Select the created port, and then click [Next >].
10
Click [Have Disk...].
11
Click [Browse...].
12
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Selecta-
ble printer drivers:PCL driver and fax driver
13
Click [OK].
The [Printer:] list appears.
14
Click [Next >].
bizhub C360/C280/C220
Description
In [TCP/IP Settings] of the machine, specify the IP address.
To use LPR printing:
In [LPD Setting] for the machine, enable LPD printing.
5
5-28