Cannot Configure Settings/Cannot Send Faxes According To The Settings; Error Message - Konica Minolta bizhub C452 Function Manual

5.2

Cannot configure settings/cannot send faxes according to the settings

5.2 Cannot configure settings/cannot send faxes according to the
settings
Check the following items when you cannot configure settings of the fax driver or cannot send a fax
according to the settings you have configured.
Reference
- Some items for the fax driver may not be configured simultaneously.
Problem
Cannot select items in the FAX
driver printing preferences dia-
log box.
A "conflict" message saying
"unable to configure" or "func-
tion will be canceled" appears.
Cannot send a fax according to
the settings you have config-
ured.
No watermark is printed.
Garbled characters are detect-
ed in the destination.
5.2.1

Error message

Message
Cannot connect to the network
bizhub C652/C652DS/C552/C552DS/C452
Possible Cause
Some functions cannot be com-
bined.
You are trying to configure the
functions that cannot be com-
bined.
The settings may not be config-
ured correctly.
The selected functions can be
combined in the fax driver, but
not on this machine.
The paper size or paper orienta-
tion specified in the application
may take precedence over the
settings in the fax driver when
sending a fax.
The watermark settings may not
be configured correctly.
The density of the watermark
may be too light.
Some graphic applications do
not print watermarks.
It may be impossible to obtain
any outline image from the OS.
Cause and remedy
A connection to the network was not able to be established. Make sure
that the network cable is correctly connected. In addition, make sure
that "Network Settings" in "Administrator Settings" have been correct-
ly configured.
Remedy
Grayed out items cannot be con-
figured.
Check carefully the functions you
have specified, and then specify
the functions that can be com-
bined.
Check the setting of each item of
the fax driver.
Configure settings in the applica-
tion correctly.
Check the watermark settings.
Check the density setting.
When using such a program, the
watermark cannot be printed.
When garbled characters are de-
tected in the destination, set
download fonts to bitmap fonts,
and also set printer fonts to OFF.
5
5-3